Per utilizzare le nostre app e configurazioni, prima devi aprire un nuovo account su ExpressVPN.

This tutorial will show you how to set up ExpressVPN on your Sabai router using the OpenVPN protocol. Before you start, you will need:

Not all ExpressVPN locations may be available for manually configured connections.

Important: The OpenVPN manual configuration does not offer the same security and privacy benefits as the ExpressVPN app. If your router does not support AES-NI (e.g., Asus RT-AC86U), you may experience occasional speed issues while using the OpenVPN manual configuration. If you are located in a country with a high level of internet censorship, you are recommended to use the ExpressVPN app for a more stable VPN connection.

Jump to…

1. Download the VPN configuration files
2. Configure your Sabai router
Connect to a different VPN server location
Disconnect from a VPN server location


1. Download the VPN configuration files

Go to the ExpressVPN setup page. If prompted, enter your ExpressVPN credentials and select Sign In.

Enter your account credentials, then click "Sign In."

Enter the verification code that is sent to your email.

On the right, you will see your username, password, and a list of OpenVPN configuration files.With OpenVPN already selected for you, you will see your username, password, and a list of OpenVPN configuration files.

Select the location(s) you want to connect to. This will download the corresponding .ovpn file(s) to your device.

Keep this browser window open. You will need this information for the setup later.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


2. Configure your Sabai router

To access the Sabai router dashboard, open a web browser and enter 192.168.199.1 into the address bar. If your router’s IP address was changed in the past, or if you cannot remember it, you can find it in your device’s settings.

Sign in with your username and password. By default, they are admin and sabaipass123. (If you forgot your router password, factory reset your router.)

Select Sign In.

Select “Sign In.”

In the left sidebar, select Network > OpenVPN.

Select “OpenVPN.”

Select Choose file.

Select “Choose file.”

Select the ovpn. file you downloaded earlier. Select Open.

Select Show File.

Select “Show File.”

Select Edit.

Select “Edit.”

For Username/Password, paste the OpenVPN username and password you found earlier. Select Done > Save.

Select “Save.”

Select Start.

Select “Start.”

It will take a while for your Sabai router to set up the VPN connection. Once you are connected to the VPN, you will see “VPN is up via OpenVPN” and the VPN’s IP address in the top-right corner of the screen.

Once you are connected to the VPN, you will see “VPN is up via OpenVPN” and the VPN’s IP address.

To verify you are connected, you can use ExpressVPN’s IP Address Checker to check your IP address and location. They should match the IP address and location shown on the router dashboard.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


Connect to a different VPN server location

On the Sabai router dashboard, select Network > OpenVPN.

To remove your current ovpn. file, select Stop > Erase.

Select “Erase.”

Select OK.

Select “OK.”

Download another ovpn. file from the ExpressVPN website and upload the file on your router dashboard.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


Disconnect from a VPN server location

On the Sabai router dashboard, select Network > OpenVPN.

Select Stop.

Select “Stop.”

When you no longer see “VPN is up via OpenVPN” in the top-right corner of the screen, you are disconnected from the VPN.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top

Questo articolo ti ha aiutato?

Siamo spiacenti di sentirlo. Facci sapere come possiamo migliorare.

Which router model do you need help with?

Examples: Linksys WRT1200AC, Asus RT-AC56R

Un membro del nostro team di supporto seguirà il tuo problema.